DG381BDJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Power Dissipation | 470mW |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Nominal Supply Current | 230μA |
| Max Supply Current | 1mA |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns (Typ) |
| Charge Injection | 10pC |
| Crosstalk | -74dB @ 500kHz |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG381BDJ Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Electronic part bodies are injected with 14 pins. A SPST - NC switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. To find out what the 14 pins do, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 13V. It may damage the digital multiplexer if the voltage is higher than 1mA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. When using dual power supplies, you should attach at least 7V. The electronic component can function from 15V.
DG381BDJ Features
Switch Circuit: SPST - NC
DG381BDJ Applications
There are a lot of Vishay Siliconix DG381BDJ Analog Switches & Multiplexers ICs applications.
- Power routing
- Precision instrumentation
- DVD-R
- Battery Powered Instruments
- E1 Network Equipment
- Optical Applications
- Routers
- MP3 players
- PBX interfaces
- Digital access cross connects
