DG381BDJ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 50Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | DG381 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Operating Supply Current | 230μA |
| Nominal Supply Current | 230μA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 2 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns (Typ) |
| Charge Injection | 10pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG381BDJ-E3 Overview
Packed in 14-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. 14 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 14 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. Try searching with DG381 if you're looking for variants. It has an internal resistance of 50Ohm. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 36V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 13V. The switch device would be able to operate with 230μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. If you are using dual power supplies, you should attach at least 7V. This analog switch ic utilizes SEPARATE OUTPUT output. The electronic component can function from 15V. A 2 input needs to be operated.
DG381BDJ-E3 Features
1 Channels
Switch Circuit: SPST - NC
230μA Supply Current
DG381BDJ-E3 Applications
There are a lot of Vishay Siliconix DG381BDJ-E3 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Automatic test equipment
- Automotive applications
- PBX interfaces
- Cross Connects
- Cable PC
- Access Concentrators
- Digital cross connects (DSX-1)
- Transmit
- Cable Telephony – NIU, Set-Top Box, Home Side Box
