DG384BDJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Power Dissipation | 470mW |
| Reach Compliance Code | unknown |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Nominal Supply Current | 230μA |
| Max Supply Current | 1mA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns (Typ) |
| Charge Injection | 10pC |
| Crosstalk | -74dB @ 500kHz |
| Drain to Source Resistance | 50Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| RoHS Status | Non-RoHS Compliant |
DG384BDJ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on DPST - NO switching circuits. The circuits in this analogue multiplexer number 2. This digital multiplexer has 50Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 13V. Put voltage above 1mA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. A voltage of 15V can be used to operate the electronic component. A 4 input needs to be operated. There is 50Ohm Drain to Source resistance on this electronic part.
DG384BDJ Features
Switch Circuit: DPST - NO
Drain-to-Source resistance: 50Ohm
DG384BDJ Applications
There are a lot of Vishay Siliconix DG384BDJ Analog Switches & Multiplexers ICs applications.
- Automotive applications
- DVD-R
- Mechanical reed relay replacement
- Intelligent PBX
- Avionics test equipment
- SONET/SDH ADM
- Battery Powered Systems
- Sample-and-hold systems
- Avionics and Military Systems
- Precision instrumentation
