DG387AAK/883
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 10pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Analog IC - Other Type | SPDT |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Screening Level | 38535Q/M;38534H;883B |
DG387AAK/883 Overview
Presented in 14-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 14. With a 15V voltage supply, the electrical component should be turned on and run. There are 14 pins injected into the electronic part body. A DPST - NO switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Analog switches have 50Ohm internal resistance. To find out what the functions of 14 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. The lowest voltage fed to the electronic component should be 13V. Despite this switch device's dual supply capability, its voltage should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. An analog IC with the number SPDT is integrated into this board.
DG387AAK/883 Features
Switch Circuit: DPST - NO
DG387AAK/883 Applications
There are a lot of Vishay Siliconix DG387AAK/883 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- DSUs
- Audio and video routing
- Fault Tolerant Systems
- Imaging
- Fiber to the Home
- Voice over IP/DSL – Integrated Access Devices, Smart
- Sample-and-hold systems
- Precision data acquisition
- Industrial
