Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
50Ohm |
Max Power Dissipation |
470mW |
Reach Compliance Code |
unknown |
Pin Count |
14 |
Operating Supply Voltage |
15V |
Number of Circuits |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Nominal Supply Current |
230μA |
Max Supply Current |
1mA |
Turn On Delay Time |
150 ns |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
7V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
14pF 14pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
150ns, 130ns (Typ) |
Charge Injection |
10pC |
Crosstalk |
-74dB @ 500kHz |
Voltage - Supply, Dual (V±) |
±15V |
RoHS Status |
Non-RoHS Compliant |
DG387BDJ Overview
Packed in 14-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. 14 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this switch device. The internal resistance of this digital multiplexer is 50Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. 13V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer may be damaged if voltage is greater than 1mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. With dual power supplies, you should attach at least 7V. 15V operating voltages are supported by the electronic component.
DG387BDJ Features
Switch Circuit: SPDT
DG387BDJ Applications
There are a lot of Vishay Siliconix DG387BDJ Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Frame Relay Equipment
- Residential Gateways, Home Gateway/Router
- Signal routing between systems
- Relay Replacement
- Industrial and process control systems
- Medical systems
- Multi-Line E1 Interface Cards
- Audio signal routing
- Video switching