DG390ACJ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG390A |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 230μA |
| Nominal Supply Current | 230μA |
| Max Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 19.175mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG390ACJ Overview
As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around 0°C~70°C TA. In total, 16 terminations have occurred. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPDT switching circuits. Use DG390A to search for variants of the digital switches. Analog switches have 50Ohm internal resistance. Datasheets for functions of 14 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 18V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 5V voltage fed to the electrical part below 5V. 230μA current would be enough for this multiplexer to operate. When the digital multiplexer is charged above 500μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. You should attach at least 5V voltage if you are using dual power supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
DG390ACJ Features
2 Channels
Switch Circuit: SPDT
230μA Supply Current
DG390ACJ Applications
There are a lot of Maxim Integrated DG390ACJ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Ultrasound
- PDH Multiplexers
- Remote wireless modules
- CSU
- Intelligent PBX
- E1 Multiplexer
- SDH/SONET multiplexers
- HDTV
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
