DG401DJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Reach Compliance Code | unknown |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 60pC |
| Crosstalk | -94.8dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Drain to Source Resistance | 35Ohm |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±15V |
| RoHS Status | Non-RoHS Compliant |
DG401DJ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NO switching circuits. There are 2 circuits in this switch device. The analog multiplexer shown here is a typical Multiplexer or Switches. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There is 35Ohm Drain to Source resistance on this electronic part.
DG401DJ Features
Switch Circuit: SPST - NO
Drain-to-Source resistance: 35Ohm
DG401DJ Applications
There are a lot of Vishay Siliconix DG401DJ Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Digital access cross connects
- DSUs
- Data Acquisition Systems
- PCMCIA cards
- Digital cross connects (DSX-1)
- Switching Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Avionics test equipment
