Parameters |
Number of Inputs |
2 |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
100 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
45Ohm |
Min Dual Supply Voltage |
7V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
12pF 12pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
150ns, 100ns |
Charge Injection |
60pC |
Crosstalk |
-94.8dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±15V |
Height |
4.45mm |
Length |
19.43mm |
Width |
7.87mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
1.627801g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2016 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DG401 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Operating Supply Current |
5μA |
Power Dissipation |
450mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
150 ns |
DG401DJ-E3 Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for the analog switch ic with DG401 if you are looking for variants. In this multiplexer, the internal resistance is 55Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. An effective Dual, Single supply digital multiplexer. 13V should be the lowest voltage fed to the electronic component. An operating current of 5μA would be sufficient for this switch device. A digital multiplexer may suffer damage if voltage is applied above 1μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. The electronic component can function from 15V. Operating the 2 inputs requires 2 inputs.
DG401DJ-E3 Features
1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
DG401DJ-E3 Applications
There are a lot of Vishay Siliconix DG401DJ-E3 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Audio/video switches
- Power routing
- Video signal routing
- SDH
- E1 Multiplexer
- PCMCIA cards
- USB 1.1 signal switching circuits
- Battery Powered Systems
- Voice over IP/DSL – Integrated Access Devices, Smart