DG401DVZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 45Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 17V |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Off-state Isolation-Nom | 72 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| On-state Resistance Match-Nom | 3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
DG401DVZ Overview
Presented in TSSOP, this electrical component is convenient for overseas shipping. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. The internal resistance of this digital multiplexer is 45Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 40V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 5V. This digital switch can be operated with a current of 10nA. The analogue multiplexer may be damaged if voltage is greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 17V. If you are using a dual power supply, you should attach at least 5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 28V operating voltages are supported by the electronic component. Don't miss this electronic component's additional features, such as: IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
DG401DVZ Features
1 Channels
10nA Supply Current
Additional Features: IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY
DG401DVZ Applications
There are a lot of Intersil (Renesas Electronics America) DG401DVZ Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Private Branch Exchange (PBX)
- Channelized and Unchannelized DS3 applications
- Precision test equipment
- USB 1.1 signal switching circuits
- Voice over IP/DSL – Integrated Access Devices, Smart
- Imaging
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote Powered Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
