DG401DY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 45Ohm |
| Reach Compliance Code | unknown |
| Pin Count | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Throw Configuration | SPST |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 60pC |
| Crosstalk | -94.8dB @ 1MHz |
| Voltage - Supply, Dual (V±) | ±15V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
DG401DY Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. There is an electrical component included in the 16 series. SPST - NO switching circuits are used in these analog switch ics. It consists of 2 circuits. In this multiplexer, the internal resistance is 45Ohm. Multiplexers should not be powered above 36V in normal situations. 13V is the lowest voltage that should be fed to the electronic electronic part. Despite this switch device's dual supply capability, its voltage should not exceed 22V. You should attach at least 7V voltage if you are using dual power supply.
DG401DY Features
Switch Circuit: SPST - NO
DG401DY Applications
There are a lot of Vishay Siliconix DG401DY Analog Switches & Multiplexers ICs applications.
- PDAs
- Microprocessor Controlled Analog Systems
- Avionics test equipment
- E1 Network Equipment
- Fiber In The Loop (FITL)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Channel Banks
- Industrial control systems
- High-Voltage
- High speed data transmission line cards
