Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
45Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
15V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Qualification Status |
Not Qualified |
Power Supplies |
5+-15V |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
45Ohm |
Min Dual Supply Voltage |
7V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
12pF 12pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
150ns, 100ns |
Charge Injection |
60pC |
Crosstalk |
-94.8dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
150ns |
Switch-off Time-Max |
100ns |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
Non-RoHS Compliant |
DG401DY-T1 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. The analog switch ics are built using SPST - NO switching circuits. There are 2 circuits in this switch device. Internally, this switch multiplexer has a resistance of 45Ohm. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 36V in normal situations. The lowest voltage the electronic part should receive is 13V. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. There are SEPARATE OUTPUT outputs on this analog switch ic.
DG401DY-T1 Features
1 Channels
Switch Circuit: SPST - NO
DG401DY-T1 Applications
There are a lot of Vishay Siliconix DG401DY-T1 Analog Switches & Multiplexers ICs applications.
- SDH
- Routers
- Relay replacements
- Sample-and-hold systems
- Avionics test equipment
- E1 Multiplexer
- Industrial and process control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cross Connects
- Industrial