DG401DYZ

Analog Switches MAKE-BEFORE-BREAK 16 Pins 15V SOIC

Manufacturer: Intersil (Renesas Electronics America)
Nocochips NO: 391-DG401DYZ
Package: SOIC
Datasheet: PDF
Stock: 933
Description: Analog Switches MAKE-BEFORE-BREAK 16 Pins 15V SOIC(Kg)

Details

Tags

Parameters
Turn On Delay Time	150 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	17V
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Off-state Isolation-Nom	72 dB
On-state Resistance Match-Nom	3Ohm
Switching	MAKE-BEFORE-BREAK
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Package / Case	SOIC
Number of Pins	16
Published	1999
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3
Number of Terminations	16
Resistance	45Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	16
Operating Supply Voltage	28V
Polarity	Non-Inverting
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	40V
Min Supply Voltage	5V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	1μA
Throw Configuration	SPST

DG401DYZ Overview

Shipping overseas is convenient due to the electrical component's packing in SOIC. There are 16 terminations totally. A 2 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. In this multiplexer, the internal resistance is 45Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. The switch device would be able to operate with 10nA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 17V. For dual power supplies, a voltage of at least 5V should be attached. There is a voltage range of 28V operating voltages for the electrical part. Additional features of the electronic component include: IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.