DG403CJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG403 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Normal Position | NO/NC |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG403CJ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around 0°C~70°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPDT switching circuits. The circuits in this analogue multiplexer number 2. Using the DG403 search parameter, you can discover variants of the switch. A analogue multiplexer of this type is a Multiplexer or Switches. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
DG403CJ Features
1 Channels
Switch Circuit: SPDT
DG403CJ Applications
There are a lot of Maxim Integrated DG403CJ Analog Switches & Multiplexers ICs applications.
- Data switching
- PBX interfaces
- Automatic test equipment
- Public switching systems
- Avionics test equipment
- Battery Powered Systems
- Digital access cross connects
- Communication systems
- PBXs
- Routers
