DG403DJ+

150ns, 100ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG403 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG403DJ+
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 183
Description: 150ns, 100ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG403 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG403
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	5+-15V
Number of Channels	2
Max Supply Voltage	30V
Min Supply Voltage	10V
Operating Supply Current	10nA
Nominal Supply Current	1nA
Max Supply Current	1nA
Turn On Delay Time	150 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	9V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No

DG403DJ+ Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. DG403 can be used to search for analog multiplexer variants. An switch multiplexer with 45Ohm internal resistance has a value of 45Ohm. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 30V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 10V. This multiplexer would work with 10nA current. When the digital multiplexer is charged above 1nA, damage can occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. The voltage should be at least 4.5V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 20V operating voltages.