DG403DYZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| Part Status | Active |
| Resistance | 45Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 4 |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 5μA |
| Number of Bits | 2 |
| Throw Configuration | DPST, SPDT |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 17V |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Drain to Source Resistance | 45Ohm |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG403DYZ Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. High reliability is achieved by using advanced packaging method Bulk. Due to its 2 channels, the electrical component produces high-quality output. Analog switches have 45Ohm internal resistance. The functions of 16 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. An effective Dual, Single supply digital multiplexer. There should be 5V voltage fed to the electrical part below 5V. The analogue multiplexer could operate on 10nA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 5μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 17V. If you are using a dual power supply, you should attach at least 5V. Operating 4 inputs is required. Temperatures above 85°C should not be used to operate the switches. There is 45Ohm resistance between Drain and Source for this electronic part. Multiplexer ics with 4 outputs are available. 2-bits are supported.
DG403DYZ Features
2 Channels
10nA Supply Current
Drain-to-Source resistance: 45Ohm
2-Bit
DG403DYZ Applications
There are a lot of Intersil (Renesas Electronics America) DG403DYZ Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Digital Cross-Connects
- Microwave transmission systems
- Multiplexers
- SONET/SDH ADM
- Microprocessor Controlled Analog Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Power routing
- Private Branch Exchange (PBX)
- PBXs
