DG403DYZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG403 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 5V~34V ±5V~17V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 60pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Drain to Source Resistance | 45Ohm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
DG403DYZ Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SPDT switching circuit are built. A total of 2 circuits make up this switch device. Try searching with DG403 to find analog multiplexer variants. Check out the electrical component's additional features, such as the following: IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY. Drain to Source resistance for this electronic component is 45Ohm.
DG403DYZ Features
1 Channels
Switch Circuit: SPDT
Additional Features: IT CAN ALSO OPERATE FROM 5V TO 34V SINGLE SUPPLY
Drain-to-Source resistance: 45Ohm
DG403DYZ Applications
There are a lot of Renesas Electronics America Inc. DG403DYZ Analog Switches & Multiplexers ICs applications.
- HDTV
- CSU
- Remote Powered Equipment
- Data Acquisition Systems
- Relay Replacement
- SONET
- Intelligent PBX
- New designs requiring multiplexer functions
- SDH/SONET multiplexers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
