DG4051EEY-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 78Ohm |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 308MHz |
| On-State Resistance (Max) | 78Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 49 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.2pF 9.2pF |
| On-state Resistance Match-Nom | 0.91Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 88ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 910m Ω |
| Crosstalk | -105dB @ 100kHz |
| Switch-on Time-Max | 86ns |
| Switch-off Time-Max | 97ns |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
DG4051EEY-T1-GE3 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -40°C~125°C TA is the extended operating temperature. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. The circuits in this analogue multiplexer number 1. The internal resistance of this digital multiplexer is 78Ohm. For functions related to 16 pins, please refer to the datasheets. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
DG4051EEY-T1-GE3 Features
8 Channels
-3db Bandwidth: 308MHz
DG4051EEY-T1-GE3 Applications
There are a lot of Vishay Siliconix DG4051EEY-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Routers
- Low-Voltage
- Private Branch Exchange (PBX)
- Wireless Local Loop
- Communication systems
- Digital cross connects (DSX-1)
- Medical Instrumentation
- Cable Modem
- Audio signal routing
- Fault Tolerant Systems
