DG4052AEN-T1-E4

108ns, 92ns SP4T 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG4052 16 Pins 1nA 3V 16-WFQFN

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG4052AEN-T1-E4
Package: 16-WFQFN
Datasheet: PDF
Stock: 715
Description: 108ns, 92ns SP4T 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG4052 16 Pins 1nA 3V 16-WFQFN(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-WFQFN
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2014
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Max Power Dissipation	525mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG4052
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	-1μA
Power Dissipation	525mW
Max Supply Current	1μA
Propagation Delay	172 ns
Turn On Delay Time	151 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.5V~5V
Supply Type	Dual, Single
Bandwidth	450MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	138 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 7pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	108ns, 92ns
Charge Injection	0.25pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Crosstalk	-67dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	119ns
Switch-off Time-Max	103ns
Height	750μm
Length	2.6mm
Width	1.8mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG4052AEN-T1-E4 Overview

This electronic part is conveniently packaged in 16-WFQFN, making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 16. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. DG4052 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. In order to operate this switch device, it would need a current of -1μA. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. When using dual power supplies, you should attach at least 2.5V. The electrical component supports 8 inputs. 450MHz-bandwidths can be used to transfer data between multiplexers.