DG4052AEQ-T1-E3

108ns, 92ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG4052 16 Pins 1nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG4052AEQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 778
Description: 108ns, 92ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG4052 16 Pins 1nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	MATTE TIN
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG4052
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	-1μA
Nominal Supply Current	50nA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	SPDT
Propagation Delay	172 ns
Turn On Delay Time	151 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.5V~5V
Supply Type	Dual, Single
Bandwidth	730MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	138 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	450MHz
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 7pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	108ns, 92ns
Charge Injection	0.25pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Crosstalk	-67dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	119ns
Switch-off Time-Max	103ns
Height	920μm
Length	5.07mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG4052AEQ-T1-E3 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. SP4T switching circuits are used in these analog switch ics. It consists of 2 circuits. Use DG4052 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 100Ohm. Datasheets for functions of 16 pins are available. normally, users should not supply switches with voltages higher than 12V. A cost-effective Dual, Single supply type analogue multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. -1μA current would be enough for this multiplexer to operate. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 2.5V should be attached. In order to operate the 8 inputs, there are several steps to follow. 730MHz bandwidths enable data to be transferred.