DG4052EEY-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 78Ohm |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 353MHz |
| On-State Resistance (Max) | 78Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 49 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.2pF 4.8pF |
| On-state Resistance Match-Nom | 0.91Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 75ns, 88ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 910m Ω |
| Crosstalk | -105dB @ 100kHz |
| Switch-on Time-Max | 86ns |
| Switch-off Time-Max | 97ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
DG4052EEY-T1-GE3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. An switch multiplexer with 78Ohm internal resistance has a value of 78Ohm. To find out what the 16 pins do, please refer to the datasheets. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
DG4052EEY-T1-GE3 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 353MHz
DG4052EEY-T1-GE3 Applications
There are a lot of Vishay Siliconix DG4052EEY-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Remote wireless modules
- Power routing
- DVD-R
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital cross connects (DSX-1)
- Automatic test equipment
- Precision instrumentation
- Digital access cross connects
- SDH/SONET multiplexers
