DG4053EEY-T1-GE3
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 78Ohm |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 930MHz |
| On-State Resistance (Max) | 78Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 49 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 3.1pF |
| On-state Resistance Match-Nom | 0.91Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 75ns, 88ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 910m Ω |
| Crosstalk | -105dB @ 100kHz |
| Switch-on Time-Max | 86ns |
| Switch-off Time-Max | 97ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
DG4053EEY-T1-GE3 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. Unlike digital switches, these are based on SPDT switching circuits. 3 circuits are used in this analogue multiplexer. It has an internal resistance of 78Ohm. Datasheets for functions of 16 pins are available.
DG4053EEY-T1-GE3 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 930MHz
DG4053EEY-T1-GE3 Applications
There are a lot of Vishay Siliconix DG4053EEY-T1-GE3 Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Battery-powered systems
- Modems
- Microprocessor Controlled Analog Systems
- E1 Network Equipment
- Audio and video switching
- Cell phones
- Data Acquisition Systems
- PBX interfaces
- Data switching
