DG405AK/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Power Supplies | 5+-15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 150 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 30Ohm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 18V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG405AK/883B Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 16. A 2 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. Into the electrical component body are injected 16 pins. Multiplexers built on a DPST - NO switching circuit are built. 2 circuits are used in this analogue multiplexer. Internally, this switch multiplexer has a resistance of 30Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 30V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. 10V is the lowest voltage that should be fed to the electronic electronic part. It may damage the digital multiplexer if the voltage is higher than 1μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electronic component can function from 28V.
DG405AK/883B Features
2 Channels
Switch Circuit: DPST - NO
DG405AK/883B Applications
There are a lot of Maxim Integrated DG405AK/883B Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Data switching
- Intelligent PBX
- Transmit
- Isolation
- Avionics test equipment
- Data Acquisition Systems
- Microprocessor Controlled Analog Systems
- DSLAMs
- Power routing
