DG405CJ+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DG405 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Normal Position | NO |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
DG405CJ+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. 16 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using DPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. DG405 can be used to search for analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
DG405CJ+ Features
1 Channels
Switch Circuit: DPST - NO
DG405CJ+ Applications
There are a lot of Maxim Integrated DG405CJ+ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Microwave transmission systems
- Switching Systems
- Audio and video signal routing
- Audio and video routing
- Cellular phones
- Avionics test equipment
- E1 Multiplexer
- Communication systems
- Sample hold systems
