DG405DJ-E3

150ns, 100ns DPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG405 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG405DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 400
Description: 150ns, 100ns DPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG405 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	55Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Peak Reflow Temperature (Cel)	265
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG405
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	5μA
Nominal Supply Current	10nA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	DPST, SPDT
Turn On Delay Time	150 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	DPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	60pC
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG405DJ-E3 Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. A 2 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Multiplexers built on a DPST - NO switching circuit are built. The circuits in this analogue multiplexer number 2. Search with DG405 if you are looking for analog multiplexer variants. A 55Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 13V. The switch device would be able to operate with 5μA current. A voltage higher than 1μA may cause damage to the switch multiplexer. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. You should attach at least 7V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages range from 15V. In order to operate the 4 inputs, there are several steps to follow.