DG406BDN-T1-E3
| Parameters | |
|---|---|
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG406 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 7.5V |
| Operating Supply Current | 30μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 163 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 94 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 86 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 108pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Time (Ton, Toff) (Max) | 107ns, 88ns |
| Charge Injection | 11pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height | 3.69mm |
| Length | 12.57mm |
| Width | 12.57mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
DG406BDN-T1-E3 Overview
The electrical component comes in 28-LCC (J-Lead) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. In total, 28 terminations have occurred. This electronic part offers high-quality output due to its 16 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. There is an electrical component included in the 28 series. A 1 circuit is present in this switch device. Try searching with DG406 if you're looking for variants. The internal resistance of this digital multiplexer is 100Ohm. The datasheets for the 28 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 7.5V. This digital switch can be operated with a current of 30μA. It may damage the digital multiplexer if the voltage is higher than 500μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. If you are using a dual power supply, you should attach at least 5V. It is possible to operate 16 inputs.
DG406BDN-T1-E3 Features
16 Channels
30μA Supply Current
DG406BDN-T1-E3 Applications
There are a lot of Vishay Siliconix DG406BDN-T1-E3 Analog Switches & Multiplexers ICs applications.
- Modems
- PDAs
- Optical Applications
- Automotive applications
- DSUs
- Low-Voltage
- Central office
- Video signal routing
- Routers
- Audio and video signal routing
