DG406BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SOIC |
| Weight | 792.000628mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 450mW |
| Number of Outputs | 1 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 7.5V |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 148 ns |
| Turn On Delay Time | 125 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 94 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 108pF |
| Switch Time (Ton, Toff) (Max) | 107ns, 88ns |
| Charge Injection | 11pC |
| Channel-to-Channel Matching (ΔRon) | 3Ohm |
| Height | 2.34mm |
| Length | 17.91mm |
| Width | 7.49mm |
| RoHS Status | Non-RoHS Compliant |
DG406BDW Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 16:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. Due to its 1 channels, the electrical component produces high-quality output. It consists of 1 circuits. An switch multiplexer with 60Ohm internal resistance has a value of 60Ohm. The functions of 28 pins can be found in the datasheets. A voltage higher than 36V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 7.5V should be applied to the electronic component. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. A dual power supply should have at least 5V voltage attached. The electrical part can be operated at 15V voltage levels. Among the inputs that can be operated are the 16 inputs. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. An output of 1 is provided by the digital multiplexer. Suppliers offer the 28-SOIC package.
DG406BDW Features
1 Channels
DG406BDW Applications
There are a lot of Vishay Siliconix DG406BDW Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- DVD-R
- RGB switches
- High-Voltage
- Microprocessor Controlled Analog Systems
- Mechanical reed relay replacement
- ISDN NT1/TA
- Channel Banks
- SDH
- SDH/SONET multiplexers
