DG406CJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DG406 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG406CJ+ Overview
Shipping overseas is convenient due to the electrical component's packing in 28-DIP (0.600, 15.24mm). High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Through Hole. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. 28 terminations have been made so far. A electrical component with 16 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. A total of 28 pins are injected into the body of the electronic part. It consists of 1 circuits. Try searching for the analog switch ic with DG406 if you are looking for variants. This digital multiplexer has 175Ohm internal resistance. For details about the functions of 28 pins, please refer to the datasheets. A voltage higher than 30V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. It is recommended to use 5V as the lowest voltage for the electrical part. For this digital switch to work, 500μA current would suffice. Despite this switch's dual supply capability, its voltage should not exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. There is a voltage range of 28V operating voltages for the electrical part.
DG406CJ+ Features
16 Channels
500μA Supply Current
DG406CJ+ Applications
There are a lot of Maxim Integrated DG406CJ+ Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- FTTH
- Residential Gateways, Home Gateway/Router
- Private Branch Exchange (PBX)
- Data Acquisition Systems
- Low-Voltage
- PCMCIA cards
- Automatic test equipment
- T1/E1 Terminals
- Industrial and process control systems
