DG406DJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 50μA |
| Power Dissipation | 625mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 18V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 50Ohm |
| Signal Current-Max | 0.02A |
| Height | 3.31mm |
| Length | 39.7mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
DG406DJ Overview
Presented in 28-DIP (0.600, 15.24mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have the same number of circuits 16:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 28. A 16 channel electronic part produces high-quality output. An injection of 28 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. As far as internal resistance is concerned, it has 100Ohm. For details about the functions of 28 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 44V to a switch device. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 7.5V. A digital multiplexer may suffer damage if voltage is applied above 500μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. You should attach at least 5V voltage if you are using dual power supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. A voltage of 15V can be used to operate the electronic component. Drain to Source resistance is 50Ohm.
DG406DJ Features
16 Channels
Drain-to-Source resistance: 50Ohm
DG406DJ Applications
There are a lot of Vishay Siliconix DG406DJ Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Fiber In The Loop (FITL)
- Communication systems
- Multiplexers
- Transmit
- Avionics
- Remote Powered Equipment
- PBXs
- Industrial control systems
- Avionics test equipment
