DG406DJ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DG406 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Operating Supply Current | 30μA |
| Power Dissipation | 625mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.02A |
| Height | 3.31mm |
| Length | 39.7mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG406DJ-E3 Overview
This electronic part is conveniently packaged in 28-DIP (0.600, 15.24mm), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. There are 28 terminations totally. Due to its 16 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 28 pins are injected into the body of the electronic part. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with DG406. There is 100Ohm internal resistance in this digital multiplexer. To find out what the 28 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 44V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 7.5V as the lowest voltage for the electrical part. 30μA current would be enough for this multiplexer to operate. Put voltage above 500μA on the multiplexer to cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIf you are using dual power supplies, you should attach at least 5V. 15V operating voltages can be used with this electrical part. The 16 inputs need to be operated in order to work.
DG406DJ-E3 Features
16 Channels
30μA Supply Current
DG406DJ-E3 Applications
There are a lot of Vishay Siliconix DG406DJ-E3 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Public switching systems
- Cable PC
- Relay Replacement
- Signal routing between systems
- PBXs
- Power routing
- Remote Powered Equipment
- Precision test equipment
