DG406DJZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Off-state Isolation-Nom | 69 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Height | 4.95mm |
| Length | 39.7mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG406DJZ Overview
Due to its PDIP packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Bulk is used. Total terminations are 28. By its 1 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. The internal resistance of this digital multiplexer is 50Ohm. Please refer to the datasheets for 28 pins functions. Users should never supply a voltage higher than 40V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 80μA. There is no problem with using dual supply voltage, but it should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. This electrical part is compatible with 28V operating voltages. In an environment with a temperature higher than 85°C, the digital switches should not operate.
DG406DJZ Features
1 Channels
80μA Supply Current
DG406DJZ Applications
There are a lot of Intersil (Renesas Electronics America) DG406DJZ Analog Switches & Multiplexers ICs applications.
- Communication systems
- PDH Multiplexers
- Medical Instrumentation
- Battery-powered systems
- Private Branch Exchange (PBX)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PBX interfaces
- High speed data transmission line cards
- MP3 players
- Battery Powered Instruments
