DG406DN+

200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG406 28 Pins 500pA 15V 28-LCC (J-Lead)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG406DN+
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 319
Description: 200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG406 28 Pins 500pA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	175Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	842mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG406
Pin Count	28
Operating Supply Voltage	28V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	30V
Min Supply Voltage	5V
Operating Supply Current	500μA
Power Dissipation	842mW
Max Supply Current	500μA
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Dual Supply Voltage	9V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 130pF
On-state Resistance Match-Nom	1.5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Signal Current-Max	0.02A
Height	3.96mm
Length	11.58mm
Width	11.58mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG406DN+ Overview

Due to its 28-LCC (J-Lead) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 28. High-quality output is provided by the electronic component's 16 channels. A 15V voltage supply should turn on and run the electronic component. There are 28 pins injected into the electronic part body. A total of 1 circuits make up this switch device. DG406 can be used to search for analog multiplexer variants. There is 175Ohm internal resistance in this digital multiplexer. To find out what the functions of 28 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 30V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 5V. This multiplexer would work with 500μA current. The analogue multiplexer may be damaged if voltage is greater than 500μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIt is recommended that you attach at least 4.5V to your dual power supply. A voltage of 28V can be used to operate the electronic component. The electrical component supports 16 inputs.