DG406DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SOIC |
| Weight | 792.000628mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 450mW |
| Number of Outputs | 1 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Nominal Supply Current | 50μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Drain to Source Resistance | 100Ohm |
| Height | 2.34mm |
| Length | 17.91mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
DG406DW Overview
Shipping overseas is convenient with the electronic component packed in 28-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~85°C TA. The electronic part delivers high-quality output through its 1 channels. It consists of 1 circuits. The internal resistance of this digital multiplexer is 50Ohm. To find out what the 28 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 44V. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 7.5V should be applied to the electronic component. It may damage the digital multiplexer if the voltage is higher than 500μA. There is no problem with using dual supply voltage, but it should not exceed 20V. With dual power supplies, you should attach at least 5V. This electrical part is compatible with 15V operating voltages. Among the inputs that can be operated are the 16 inputs. The switches should not operate in an environment where the temperature is higher than 85°C. Drain to Source resistance is 100Ohm. In this digital multiplexer, there are 1 outputs. Suppliers offer 28-SOIC packages.
DG406DW Features
1 Channels
Drain-to-Source resistance: 100Ohm
DG406DW Applications
There are a lot of Vishay Siliconix DG406DW Analog Switches & Multiplexers ICs applications.
- SDH
- PDH Multiplexers
- Wireless Local Loop
- Optical Applications
- 65 V DACs
- Ultrasound
- Microprocessor Controlled Analog Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Avionics test equipment
- FTTH
