DG406DW-T1-E3
| Parameters | |
|---|---|
| Width | 7.493mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Drain to Source Resistance | 100Ohm |
| Height Seated (Max) | 2.54mm |
DG406DW-T1-E3 Overview
Packed in 28-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 16:1. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 28. The electronic part provides high-quality output because it has 16 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Circuits number 1 make up this analogue multiplexer. To find out what the functions of 28 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 44V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. When using dual power supplies, you should attach at least 5V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Drain to Source resistance for this electronic component is 100Ohm.
DG406DW-T1-E3 Features
16 Channels
Drain-to-Source resistance: 100Ohm
DG406DW-T1-E3 Applications
There are a lot of Vishay Siliconix DG406DW-T1-E3 Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- E1 Network Equipment
- Battery Powered Systems
- Battery-powered systems
- T1/E1 Terminals
- E1 Multiplexer
- Medical systems
- ATM
- Fiber to the Home
- Fiber In The Loop (FITL)
