DG406DYZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Interface | Logic |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 1.2mW |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Max Supply Current | 100μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 9V |
| Off-state Isolation-Nom | 69 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Max Junction Temperature (Tj) | 150°C |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG406DYZ Overview
Shipping overseas is convenient due to the electrical component's packing in SOIC. High reliability is achieved by using advanced packaging method Bulk. 28 terminations have been made so far. The electronic part provides high-quality output because it has 16 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 28 pins. The circuits in this analogue multiplexer number 1. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. You can find the functions of the 28 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. 80μA current would be enough for this multiplexer to operate. If you put voltage higher than 100μA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. This electrical part is compatible with 28V operating voltages. It is not recommended to operate the switches in an environment with a temperature higher than 85°C.
DG406DYZ Features
16 Channels
80μA Supply Current
DG406DYZ Applications
There are a lot of Intersil (Renesas Electronics America) DG406DYZ Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Residential Gateways, Home Gateway/Router
- Fiber to the Home
- Battery-powered systems
- PBXs
- Modems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Access Concentrators
- Remote wireless modules
- Communications systems
