DG406DYZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DG406 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~34V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 160pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 40pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switch-on Time-Max | 200ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
DG406DYZ-T Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 28 terminations. High-quality output is provided by the electronic component's 16 channels. With a 15V voltage supply, the electrical component should be turned on and run. An injection of 28 pins is performed into the body of the electrical component. A total of 1 circuits make up this switch device. Search with DG406 if you are looking for analog multiplexer variants. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.
DG406DYZ-T Features
16 Channels
DG406DYZ-T Applications
There are a lot of Renesas Electronics America Inc. DG406DYZ-T Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Medical
- Automotive applications
- FTTH
- DVD-R
- Ultrasound
- Multi-Line E1 Interface Cards
- Signal routing between systems
- Cable Modem
- Cellular phones
