DG406EUI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.025W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG406 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 16μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Height | 950μm |
| Length | 9.86mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG406EUI+ Overview
Packed in 28-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 16:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, 28 terminations have occurred. As a result of its 16 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 28 series is equipped with this electronic component. There are 1 circuits in this switch device. Using the DG406 search parameter, you can discover variants of the switch. It has an internal resistance of 175Ohm. The functions of 28 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 30V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 5V voltage fed to the electrical part below 5V. This digital switch can be operated with a current of 16μA. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. The electronic component can function from 28V.
DG406EUI+ Features
16 Channels
16μA Supply Current
DG406EUI+ Applications
There are a lot of Maxim Integrated DG406EUI+ Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- DVD-R
- Multiplexers
- SDH/SONET multiplexers
- Battery Powered Instruments
- Medical Instrumentation
- Mechanical reed relay replacement
- HDTV
- Sample hold systems
- SONET
