DG406EWI
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG406 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.02A |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG406EWI Overview
Shipping overseas is convenient with the electronic component packed in 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there are 28 terminations. This electronic part offers high-quality output due to its 16 channels. A 15V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 28 series. It consists of 1 circuits. Try searching with DG406 if you're looking for variants. A 175Ohm internal resistance characterizes this multiplexer. The functions of 28 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. This digital switch can be operated with a current of 500μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 4.5V. The electronic component can function from 28V.
DG406EWI Features
16 Channels
500μA Supply Current
DG406EWI Applications
There are a lot of Maxim Integrated DG406EWI Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Relay replacements
- Cross Connects
- Avionics and Military Systems
- 65 V DACs
- Audio/video switches
- Avionics test equipment
- Industrial and process control systems
- Video signal routing
- High speed data transmission line cards
