DG407BDJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 60Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 7.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Max Supply Current | 500μA |
| Propagation Delay | 148 ns |
| Turn On Delay Time | 125 ns |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 94 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 86 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 54pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Time (Ton, Toff) (Max) | 107ns, 88ns |
| Charge Injection | 11pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height | 3.31mm |
| Length | 39.7mm |
| Width | 14.73mm |
| RoHS Status | Non-RoHS Compliant |
DG407BDJ Overview
This electronic part is conveniently packaged in 28-DIP (0.600, 15.24mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -40°C~85°C TA. There are 28 terminations totally. High-quality output is provided by the electronic component's 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 28 pins. It consists of 2 circuits. Analog switches have 60Ohm internal resistance. The functions of 28 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 36V. An effective Dual, Single supply digital multiplexer. 7.5V is the lowest voltage that should be fed to the electronic electronic part. It may damage the digital multiplexer if the voltage is higher than 500μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. You should attach at least 5V voltage if you are using dual power supply. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. The electrical part can be operated at 15V voltage levels.
DG407BDJ Features
8 Channels
DG407BDJ Applications
There are a lot of Vishay Siliconix DG407BDJ Analog Switches & Multiplexers ICs applications.
- CSU
- Multiplexers
- Digital cross connects (DSX-1)
- Access Concentrators
- Audio and video routing
- Battery Powered Systems
- Private Branch Exchange (PBX)
- Microprocessor Controlled Analog Systems
- Sample hold systems
- Data switching
