banner_page

DG407BDN

107ns, 88ns 60Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 500pA 15V 28-LCC (J-Lead)


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-DG407BDN
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 895
  • Description: 107ns, 88ns 60Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 500pA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Weight 1.182714g
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2016
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Resistance 60Ohm
Terminal Finish TIN LEAD
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 15V
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 28
Qualification Status Not Qualified
Operating Supply Voltage 15V
Number of Channels 8
Number of Circuits 2
Max Supply Voltage 36V
Min Supply Voltage 7.5V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Power Dissipation 450mW
Max Supply Current 500μA
Propagation Delay 148 ns
Turn On Delay Time 125 ns
Number of Inputs 16
Voltage - Supply, Single/Dual (±) 12V ±5V~20V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 94 ns
Max Dual Supply Voltage 20V
On-State Resistance (Max) 60Ohm
Min Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 86 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 6pF 54pF
On-state Resistance Match-Nom 3Ohm
Switch Time (Ton, Toff) (Max) 107ns, 88ns
Charge Injection 11pC
Channel-to-Channel Matching (ΔRon) 3 Ω
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.03A
Height 3.69mm
Length 12.57mm
Width 12.57mm
RoHS Status Non-RoHS Compliant

DG407BDN Overview


As the electronic part is packed in 28-LCC (J-Lead), international shipping is convenient. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 28 terminations. Due to its 8 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component of this type can be found in the 28 series. Circuits number 2 make up this analogue multiplexer. It has an internal resistance of 60Ohm. For details about the functions of 28 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 7.5V voltage fed to the electrical part below 7.5V. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. 15V operating voltages can be used with this electrical part. It is possible to operate 16 inputs.

DG407BDN Features


8 Channels

DG407BDN Applications


There are a lot of Vishay Siliconix DG407BDN Analog Switches & Multiplexers ICs applications.

  • Medical Instrumentation
  • 65 V DACs
  • Sample hold systems
  • Fiber to the Home
  • Video switching
  • Cable PC
  • Signal routing between systems
  • Central office
  • Precision instrumentation
  • USB 1.1 signal switching circuits

Write a review

Note: HTML is not translated!
    Bad           Good