DG407BDN-T1

107ns, 88ns 60Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 500pA 28-LCC (J-Lead)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG407BDN-T1
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 464
Description: 107ns, 88ns 60Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 500pA 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Weight	1.182714g
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	60Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Number of Functions	1
Reach Compliance Code	unknown
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	7.5V
Analog IC - Other Type	DPDT
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	163 ns
Turn On Delay Time	125 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Turn-Off Delay Time	94 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	60Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	6pF 54pF
Switch Time (Ton, Toff) (Max)	107ns, 88ns
Charge Injection	11pC
Channel-to-Channel Matching (ΔRon)	3 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	3.69mm
Length	12.57mm
Width	12.57mm
RoHS Status	Non-RoHS Compliant

DG407BDN-T1 Overview

Packed in 28-LCC (J-Lead), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 28 terminations. Due to its 8 channels, the electrical component produces high-quality output. It consists of 2 circuits. An switch multiplexer with 60Ohm internal resistance has a value of 60Ohm. Datasheets for functions of 28 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 7.5V. When the digital multiplexer is charged above 500μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. With a DPDT analog IC integrated into the board. There is a voltage range of 15V operating voltages for the electrical part. In order to operate the 16 inputs, there are several steps to follow.