DG407BDN-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 7.5V |
| Operating Supply Current | 30μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 148 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 94 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 86 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 54pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Time (Ton, Toff) (Max) | 107ns, 88ns |
| Charge Injection | 11pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height | 3.69mm |
| Length | 12.57mm |
| Width | 12.57mm |
| RoHS Status | ROHS3 Compliant |
DG407BDN-T1-E3 Overview
Packed in 28-LCC (J-Lead), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 28. As a result of its 8 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. There are 28 pins injected into the electronic part body. The circuits in this analogue multiplexer number 2. Try searching with DG407 if you're looking for variants. Analog switches have 100Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 36V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 7.5V. For this digital switch to work, 30μA current would suffice. It may damage the digital multiplexer if the voltage is higher than 500μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. With dual power supplies, you should attach at least 5V. 15V operating voltages can be used with this electrical part. There are 16 inputs to be operated.
DG407BDN-T1-E3 Features
8 Channels
30μA Supply Current
DG407BDN-T1-E3 Applications
There are a lot of Vishay Siliconix DG407BDN-T1-E3 Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Intelligent PBX
- Channel Banks
- Private Branch Exchange (PBX)
- Audio and video switching
- Imaging
- CSU
- Industrial control systems
- Multiplexers
- Cell phones
