DG407BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SOIC |
| Weight | 792.000628mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 450mW |
| Number of Outputs | 2 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 7.5V |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 148 ns |
| Turn On Delay Time | 125 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 94 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 54pF |
| Switch Time (Ton, Toff) (Max) | 107ns, 88ns |
| Charge Injection | 11pC |
| Channel-to-Channel Matching (ΔRon) | 3Ohm |
| Height | 2.34mm |
| Length | 17.91mm |
| Width | 7.49mm |
| RoHS Status | Non-RoHS Compliant |
DG407BDW Overview
This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. As a result of its 2 channels, this electronic component provides high-quality output. There are 2 circuits in this multiplexer. There is 60Ohm internal resistance in this digital multiplexer. For details about the functions of 28 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 7.5V should be the lowest voltage fed to the electronic component. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. With dual power supplies, you should attach at least 5V. 15V operating voltages can be used with this electrical part. A 16 input needs to be operated. Temperatures above 85°C should not be used to operate the switches. The analogue multiplexer has 2 outputs. It is possible to purchase a 28-SOIC package from suppliers.
DG407BDW Features
2 Channels
DG407BDW Applications
There are a lot of Vishay Siliconix DG407BDW Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- High speed data transmission line cards
- Industrial
- Fault Tolerant Systems
- Audio and video signal routing
- Industrial control systems
- PDAs
- PCMCIA cards
- Modems
