DG407CJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Length | 34.795mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG407CJ Overview
As the electronic part is packed in 28-DIP (0.600, 15.24mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. The total number of terminations is 28. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 28 pins. The circuits in this analogue multiplexer number 2. Try searching for DG407 variants of the analog switch ic. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The functions of 28 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 30V. The lowest voltage the electronic part should receive is 5V. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER.
DG407CJ Features
8 Channels
DG407CJ Applications
There are a lot of Maxim Integrated DG407CJ Analog Switches & Multiplexers ICs applications.
- Data switching
- Modems
- PBXs
- PBX interfaces
- DVD-R
- Optical Applications
- New designs requiring multiplexer functions
- Audio/video switches
- Medical Instrumentation
- Cable PC
