DG407CWI+T
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG407 |
| Pin Count | 28 |
DG407CWI+T Overview
Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. 28 terminations have been made so far. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. This electronic part can be found in the 28 series. The circuits in this analogue multiplexer number 2. Try searching with DG407 to find analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
DG407CWI+T Features
8 Channels
DG407CWI+T Applications
There are a lot of Maxim Integrated DG407CWI+T Analog Switches & Multiplexers ICs applications.
- Modems
- Automotive applications
- Battery Powered Instruments
- Low-Voltage
- Channelized and Unchannelized DS3 applications
- Data switching
- Frame Relay Equipment
- Cell phones
- Battery Powered Systems
- Audio and video routing
