DG407DJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Current-Max (Isup) | 1mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| RoHS Status | ROHS3 Compliant |
DG407DJ+ Overview
Presented in 28-DIP (0.600, 15.24mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 28. This electronic part offers high-quality output due to its 8 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 28 series. There are 2 circuits in this switch device. Search with DG407 if you are looking for analog multiplexer variants. Please refer to the datasheets for 28 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
DG407DJ+ Features
8 Channels
DG407DJ+ Applications
There are a lot of Maxim Integrated DG407DJ+ Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Medical systems
- Cross Connects
- Digital cross connects (DSX-1)
- SDH/SONET multiplexers
- Routers
- Data switching
- Cable PC
- Medical
- T1/E1 Terminals
