DG407DJ
| Parameters | |
|---|---|
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Height | 4.45mm |
| Length | 37.34mm |
| Width | 14.61mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Propagation Delay | 300 ns |
DG407DJ Overview
The electrical component comes in 28-DIP (0.600, 15.24mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 28. High-quality output is provided by the electronic component's 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. 28 pins are injected to the electronic part body. The multiplexer consists of 2 circuits. DG407 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 175Ohm. For functions related to 28 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. For this multiplexer to operate, 500μA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 20VThe voltage should be at least 4.5V if you are using dual power supplies. There is a voltage range of 28V operating voltages for the electrical part.
DG407DJ Features
8 Channels
500μA Supply Current
DG407DJ Applications
There are a lot of Maxim Integrated DG407DJ Analog Switches & Multiplexers ICs applications.
- Routers
- Automotive applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Digital Cross-Connects
- Ultrasound
- DSLAMs
- HDTV
- Cellular phones
- FTTH
- Industrial and process control systems
