DG407DN+

200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG407 28 Pins 500pA 15V 28-LCC (J-Lead)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG407DN+
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 946
Description: 200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG407 28 Pins 500pA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	842mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG407
Pin Count	28
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	30V
Min Supply Voltage	5V
Operating Supply Current	16μA
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 65pF
On-state Resistance Match-Nom	1.5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Height Seated (Max)	4.57mm
Length	11.505mm
Width	11.505mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG407DN+ Overview

Shipping overseas is convenient due to the electrical component's packing in 28-LCC (J-Lead). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 28. Due to its 8 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 28 series that this electronic component is included. A 2 circuit is present in this switch device. DG407 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 100Ohm. Please refer to the datasheets for 28 pins functions. normally, users should not supply switches with voltages higher than 30V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. For this multiplexer to operate, 16μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply.