DG407DN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 50μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 100Ohm |
| Height | 3.69mm |
| Length | 12.57mm |
| Width | 12.57mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
DG407DN Overview
Shipping overseas is convenient with the electronic component packed in 28-LCC (J-Lead). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, 28 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. An electrical component of this type can be found in the 28 series. The circuits in this analogue multiplexer number 2. Analog switches have 50Ohm internal resistance. Datasheets for 28 pin functions are available upon request. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 44V. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 7.5V as the lowest voltage for the electrical part. The switch multiplexer may be damaged if it is exposed to voltage greater than 500μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 5V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. The electrical part can be operated at 15V voltage levels. The 16 inputs need to be operated in order to work. There is 100Ohm Drain to Source resistance on this electronic part.
DG407DN Features
8 Channels
Drain-to-Source resistance: 100Ohm
DG407DN Applications
There are a lot of Vishay Siliconix DG407DN Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Avionics and Military Systems
- Cable Modem
- 65 V DACs
- Video switching
- Industrial and process control systems
- ATM
- Remote wireless modules
- Optical Applications
- E1 Network Equipment
