DG407DN-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Operating Supply Current | 30μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Height | 3.69mm |
| Length | 12.57mm |
| Width | 12.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG407DN-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 28-LCC (J-Lead). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 28 terminations have occurred. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component like this is included in the 28 series. There are 2 circuits in this multiplexer. Try searching for the analog switch ic with DG407 if you are looking for variants. Internally, this switch multiplexer has a resistance of 100Ohm. Please refer to the datasheets for 28 pins functions. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 7.5V should be applied to the electronic component. 30μA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. If you are using a dual power supply, you should attach at least 5V. This electrical part is compatible with 15V operating voltages. A 16 input needs to be operated.
DG407DN-E3 Features
8 Channels
30μA Supply Current
DG407DN-E3 Applications
There are a lot of Vishay Siliconix DG407DN-E3 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Modems
- Battery Powered Systems
- Industrial and process control systems
- Microwave transmission systems
- DVD-R
- PBXs
- Access Concentrators
- Audio and video switching
- Sample-and-hold systems
