Parameters |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 65pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 150ns |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Drain to Source Resistance |
50Ohm |
Signal Current-Max |
0.03A |
Height |
3.69mm |
Length |
12.57mm |
Width |
12.57mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-LCC (J-Lead) |
Number of Pins |
28 |
Weight |
1.182714g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DG407 |
Pin Count |
28 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Number of Circuits |
2 |
Max Supply Voltage |
44V |
Min Supply Voltage |
7.5V |
Operating Supply Current |
30μA |
Nominal Supply Current |
50μA |
Power Dissipation |
450mW |
Max Supply Current |
500μA |
Propagation Delay |
350 ns |
Turn On Delay Time |
600 ns |
Logic Function |
Multiplexer |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
12V ±5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
300 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
69 dB |
DG407DN-T1-E3 Overview
This electronic part is conveniently packaged in 28-LCC (J-Lead), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. 28 terminations have been made so far. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 28 series that this electronic component is included. A total of 2 circuits make up this switch device. Search with DG407 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. For functions related to 28 pins, please refer to the datasheets. Users shouldn't supply more than 44V voltage to the switch device. Analog switch ics with Dual, Single supply type are cost-effective. 7.5V is the lowest voltage that should be fed to the electronic electronic part. 30μA current would be enough for this multiplexer to operate. It may damage the digital multiplexer if the voltage is higher than 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 5V. The electronic component can function from 15V. In order to operate the 16 inputs, there are several steps to follow. The Drain to Source resistance of this electronic component is 50Ohm.
DG407DN-T1-E3 Features
8 Channels
30μA Supply Current
Drain-to-Source resistance: 50Ohm
DG407DN-T1-E3 Applications
There are a lot of Vishay Siliconix DG407DN-T1-E3 Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- High reliability control systems
- Automotive applications
- Cellular phones
- Automatic test equipment
- PDAs
- Microprocessor Controlled Analog Systems
- Access Concentrators
- HDTV
- Residential Gateways, Home Gateway/Router